Bei Weiternutzung dieser Website stimmen Sie der Verwendung von Cookie-Technologie zu.
Für mehr Informationen hier klicken.
close

Santa Cruz Hightower LT CC

Neuer Artikel

2 899,00 € inkl. MwSt.

Muss bestellt werden (Lieferzeit 1 - 2 Wochen)

Built for big days in big terrain.

Hightower LT is designed for maximum speed in the biggest mountains. It’s truly race-bred, its design the result of the demands of racing at the EWS, Crankworx, and Andes Pacifico.

Midway through 2016, Mark Scott came to us with a request to eke more travel out of the bike. The stock 135mm wasn’t quite enough to maintain his speed on some of the rougher tracks. Our engineering team designed a new set of links that pushed travel to 146mm at the expense of some compatibility, but because Mark’s setup was a known variable, we could be very precise. We machined two sets on site, gave one to Mark, and the other to Iago Garay, a racer much more likely to take the fun line than tuck for speed.

The links went through a few iterations to find a balance of spring rate, travel, and shock compatibility. Toward the end of 2016, it became apparent that the best way to get the performance and travel required was to design a new swingarm to pair with the links, like we did with the V10. At this point the bike got a name—Hightower LT—and we pushed the travel to a full 150mm.

Starting from the Enduro World Series in Wicklow, the Santa Cruz | SRAM team have been racing on Wicklow Green production bikes—savvy internet commenters noticed the post-mount rear brake straightaway, and it's also been seen under the elusive Ratboy at Peaty's Steel City DH, Crankworx, and Megavalanche.

  • 148 mm Hinterbau
  • 150mm (6") VPP™ suspension
  • 15 mm Gabel mit Steckachse
  • 29" wheels
  • Huckepack-Dämpfer in Flaschenhalter-Befestigung im vorderen Rahmendreieck
  • Carbon C und Carbon CC Rahmenoptionen
  • Doppelt abgedichtete Kugellager für lange Lebensdauer der Lager
  • Integrated Headset (IS41; IS52)
  • Interne Carbonrohre sorgen für eine präzise und problemlose Verlegung der Schaltzüge und Sattelstützenleitungen
  • KIG-05 Aufnahme für Kettenführungskompatibilität
  • Radial contact bearings maximize stiffness
  • Größen: S, M, L, XL, XXL
  • Tretlager mit Gewinde
SteuersatzmaßVoll-Integriert Tapered - IS41 / IS52
InnenlagermaßBSA - 73mm
Sattelstützenmaß31,6mm
UmwerfermaßHigh Direct Mount Side Swing Front Pull
Reifenfreiheit29 x 2,5"
Federweg150mm
Achs-standard12 x 148 mm "Boost" Steckachse

Aktuell keine Kunden-Kommentare

Eigene Bewertung verfassen

Specials products

Angesehene Artikel

Product successfully added to the product comparison!