This website is using cookies. By continuing to use the site, you agree to the use of cookies.

More information about our cookies and your rights can be found on our privacy notice page: click here.

I agree
Santa Cruz V10 C Bike with Component Kit "S"

Santa Cruz V10 C Bike with Component Kit "S"

SC_V10_C_S
€6,499.00
Tax included
  • 157mm rear axle spacing
  • 216mm (8.5") VPP suspension
  • 27.5" wheels
  • Adjustable geometry with HIGH & LOW settings
  • Angular contact bearings maximize stiffness
  • Carbon C and Carbon CC frame options
  • Collet axle pivots lock in place without pinch bolts
  • Double sealed pivots for long bearing life
  • Dual grease ports on lower link for easy maintenance
  • Full carbon dropouts and disk mounts
  • Full carbon frame and swingarm
  • Integrated fork bumpers with cable guide
  • ISCG-05 tabs for chainguide compatibility
  • Molded clip-on chainstay and upright protector
  • Molded rubber swingarm and downtube protection
  • Sizes: S, M, L, XL
  • Threaded Bottom Bracket
Color: V10 Blue
Size: Medium
Quantity
Not ready to ship, need to be ordered, please contact us

The Most Successful Downhill Bike of All Time, Reinvented.

The Santa Cruz V10 is the winningest bike in downhill World Cup history. Born from racing, and more than adept at the bike park, the V10's lower-link-driven, VPP suspension sports 216mm of VPP travel—yet pedals out of corners and down long motorway sections much more efficiently than you'd ever expect. We drew on feedback from the Syndicate riders, and the sixth generation V10 features a flip chip to adjust the geometry to give you a low and slack, and a lower and slacker setting:

High: 64° headtube angle / 360mm bottom bracket height.
Low: 63.5° headtube angle / 353mm bottom bracket height.

The shock rate has been tuned to be more linear and deliver consistent damping throughout the travel. Carbon lay-up analysis and frame shape optimization allowed for more efficient use of material, and the savings were then reinvested into other areas to ensure the bike withstands huge, flat landings. The front triangle and swingarm sport larger-diameter sections, but we’ll refrain from the usual drone about the positive effect that has on strength and stiffness. The new frame benefits from a slightly longer reach to suit evolving rider preferences. However, our athletes felt we always struck a good balance with our chainstay length, so we focused on maintaining this dimension when accommodating the 27.5" wheels.


COMPONENT KIT:

Frame Material Carbon C
Fork Fox 40 Performance Elite 27.5 Flat Crown
Rear Shock Fox DHX2 Performance Elite
Chainguide E13 LG1+
Rear Dérailleur SRAM GX DH - 7 Speed
Shifters SRAM GX - 7 Speed
Chainring Size 36 tooth
Crankset Truvativ Descendent
Bottom Bracket Included w/ crankset
Cassette SRAM PG720; 11-25t
Chain SRAM PC1110
Brakes SRAM Code R
Brake Rotors Avid Centerline; 203mm Front, 200mm Rear
Headset Cane Creek 40
Bars Race Face Atlas Lo; 35x800mm
Stem Santa Cruz Direct-Mount Stem; 35mm clamp
Grips Santa Cruz Palmdale Lock-on
Front Hub Novatec D641; 20x110mm
Rear Hub Novatec DH42; 12x157mm
Rims E13 LG1+
Spokes DT Swiss Competition
Front Tire Maxxis High Roller 2 DH 3C TR; 27.5x2.4
Rear Tire Maxxis High Roller 2 DH 3C TR; 27.5x2.4
Tubes Stans Sealant
Seat Post Thomson Elite, 30.9x287mm
Saddle WTB High Tail Pro
SC_V10_C_S